Posted on

Getting Start with NUTTYFI- An IoT Device Examples

Fundamental Requirements:

To Start with NUTTYFI, You have to NUTTYFI IOT Device & FTDI USB to UART Bridge.

After that Connect NUTTYFI to your Computer using FTDI USB to UART Bridge & got to tools -> boards-> NodeMCU 1.0(ESP-12E Module & Select the Port like COM3.

after that copy these code (codes given below) to your arduino IDE & compile & upload to NUTTYFI & all done.

Download: 

Examples- 

  • How to Blink LED using NUTTYFI?