Status Light and Reset

Docs / QR onboarding / Status light & reset
QR onboarding

Status light & reset

The status light tells you what your device is doing. A reset clears its Wi-Fi and account so you can set it up again, for example after changing your router or before giving it to someone else.

Blinking fast = setupBlinking slowly = connectingHold 5 seconds to reset
For people who bought a ready-made deviceThese pages are for customers setting up a product that came with a QR sticker. Building your own board? Use Quick start in Developer Mode instead.

What the light means

Blinking fastReady for setup. Add it with the app now.
Blinking slowlyConnecting to your Wi-Fi and to SME AIoT. Give it up to a minute.
Steady, off, or doing its own thingWorking. Once connected, the light belongs to the product itself.
Blinking slowly for a long time?The device can't reach your Wi-Fi. If you changed your Wi-Fi name or password, reset the device and add it again.

Reset the device

Try itLIVE
SMART SWITCHSTATUSRESETScan to set up
Status light

Press and hold the RESET button on the drawing for 5 seconds. Let go early and nothing happens.

  1. Make sure it is onThe device must be plugged in and already running. Wait until it has finished starting up.
  2. Press and hold RESETPress the reset button and keep holding it for 5 seconds. On products built on a NuttyFi board, this is the button marked FLASH.
  3. Let goThe device clears its Wi-Fi and account details and restarts. The light starts blinking fast.
  4. Add it againFollow Add a device with the same QR sticker.
Don't hold the button while plugging inHolding it while you power the device on puts it into a special update mode, and it won't start. Unplug it, plug it back in without touching the button, wait for it to start, then hold the button.

When to reset

SituationWhat to do
You changed your Wi-Fi name or passwordReset, then add it again with the new Wi-Fi.
You got a new router or moved homeReset, then add it again on the new network.
You are giving or selling the deviceReset it, and remove it from your My Devices. The new owner adds it with the QR sticker.
Setup stopped half-wayReset and start again from Add device.

Remove or reset?

ActionWhat it does
Remove from My DevicesHides the device from your app only. Nothing is deleted: the device keeps working and its dashboard stays as it is. In the app: ⋯ on the device card → Remove.
Reset on the deviceClears the Wi-Fi and account details stored on the device itself, so it can be set up again.

Next steps

Was this page helpful?