Set up a new device in about two minutes. Scan the QR sticker with the SME AIoT app, choose your home Wi-Fi, and the device adds itself to your account with its dashboard ready.
About 2 minutesAndroid and iPhoneNo codes to type2.4 GHz Wi-Fi
For people who bought a ready-made deviceThese pages are for customers setting up a product that came with a QR sticker. Building your own board? Use Quick start in Developer Mode instead.
What you need
1
Your devicePlugged in, with its QR sticker. The sticker may be on the device, its box or the manual.
2
The SME AIoT appOn your Android phone or iPhone, signed in to your account.
3
Your home Wi-FiIts name and password. It must be a 2.4 GHz network.
4
PermissionsAllow the camera. On Android, also allow location: Android needs it to find Wi-Fi networks.
Try it
Walk through it here first. Tap the buttons on the phone. Switch between Android and iPhone to see the difference.
WalkthroughLIVE
Your phone
9:41Home Wi-Fi
My devices
Add your first device
Scan the QR code on your device, or enter the claim code printed on its sticker or box.
or enter the claim code
Scan QR code
Point the camera at the QR sticker on your device
Connecting
Connecting to your device...
"SME AIoT" Wants to Join Wi-Fi Network "SME-Setup-7A1F"?
Connect to device
SME AIoT wants to use a temporary Wi-Fi network to set up your device.
SME-Setup-7A1F
Set up device Wi-Fi
Connect your device to home Wi-Fi
Device hotspot: SME-Setup-7A1F
Available Wi-Fi networks
Password
Select your home Wi-Fi network, not the device hotspot.
Adding device
Home Wi-Fi sent to your device
Phone back on your home Wi-Fi
Device joined your Wi-Fi
Device added to your account
Device added to your account.
My devices
Smart SwitchOnline
Smart Switch
Tap the switch. The device follows.
Your device
Step by step
Plug in the devicePower it on and keep it near your router. Its status light blinks fast when it is ready to be set up. If it doesn't, see Status light & reset.
Open Add deviceOpen the SME AIoT app. On My Devices, tap Add device. If you have no devices yet, this page opens on its own.
Scan the QR stickerTap Scan QR code and point the camera at the sticker. In a dark room, tap the flashlight icon.
Let the app join the deviceThe app joins the device's own Wi-Fi hotspot, named SME-Setup- followed by four characters. If your phone asks, tap Join (iPhone) or Connect (Android). For a moment your phone has no internet: that's expected.
Choose your home Wi-FiPick your home network from the list, type its password and tap Configure device. Pick your home Wi-Fi, not the SME-Setup hotspot.
Wait for "Device added"Your phone goes back to your home Wi-Fi, the device joins it and adds itself to your account. When you see Device added to your account. the device is on My Devices with its dashboard ready.
Use a 2.4 GHz networkMost devices can't join 5 GHz Wi-Fi. If your router shows two networks, such as Home and Home_5G, pick the one without 5G. Not sure? Ask your internet provider or check the router's label.
Your privacy and security
1
Nothing to typeYou never see or type a code or token. The QR sticker does the work.
2
Wi-Fi stays localYour Wi-Fi password goes from your phone straight to your device. It is never sent to the cloud.
3
Genuine devices onlyThe app checks the device is a genuine product before it can be added.
4
One owner at a timeOnce added, the device belongs to your account. To pass it on, reset it first.
Keep the QR stickerYou need it again if you reset the device, for example after changing your Wi-Fi or giving the device to someone else.