Description
NuttyFi Fusion X is a dual-processor development board by SME Dehradun. It puts an ESP32-WROOM-32 and an STM32F103C8T6 side by side, so one board handles both the connected side of a project and the real-time control side.
Core idea: let the ESP32 look after Wi-Fi, Bluetooth and the cloud, while the STM32 looks after timing-critical work such as motors, sensors and control loops.
What you get on the board
- ESP32-WROOM-32 module: dual-core processor with 2.4 GHz Wi-Fi and Bluetooth.
- STM32F103C8T6 microcontroller: 32-bit ARM Cortex-M3 running at up to 72 MHz, with 64 KB flash and 20 KB RAM.
- Separate programming pins for each chip: upload code to the ESP32 or the STM32 directly with a programmer, without removing anything.
- Dedicated 3.3V, 5V and GND pins: plug sensors and modules straight in, with no breadboard power rails.
- USB-C power input: power the board from any USB-C cable or adapter.
- Battery input: a BAT connector for portable projects.
- Reset and boot buttons for both processors.
Please note: the USB-C port is for power only. Code is uploaded through the programming pins using a programmer such as the NuttyFi Universal Programmer.
Why two processors?
- No compromise between Wi-Fi and timing: wireless work on the ESP32 never interrupts control code on the STM32.
- More pins: the input and output pins of both chips are brought out to headers.
- One board, less wiring: no need to link two separate boards with jumper wires.
Perfect for:
IoT products, industrial monitoring, robotics, motor control with remote access, data loggers, and student projects that need both real-time control and a cloud connection.
Power options:
- USB-C: 5 V from a USB cable or adapter (power only).
- BAT input: for battery-powered use.
What you need to program it
A programmer connected to the programming pins of the chip you want to upload to. The NuttyFi Universal Programmer works with both the ESP32 and the STM32 on this board.





