The AC dimmer can be used in applications where dimming of 110-220V AC power is required like dimming of resistive as well as inductive loads. The input can be simple PWM signal from microcontroller which control the AC output as per input with the use of optocouplers.
Control dimming from Parallel input or Serial Data input. The control part is totally isolated from high voltage by on board optocouplers.
The board can be used in applications where dimming of 110-220V AC power is required like dimming of resistive loads. The input can be simple 8 bit binary signal from microcontroller which is isolated with the use of opto-couplers.
Total of 256 levels of power control can be set from totally off(0%) to full on(100%) as per input control levels.
- AC Phase Angle Control Dimming
- Simple to use with any microcontrollers
- Output is optically isolated from input
- PWM Control Levels