Nutty Engineer's Blog
Apply for Test the NuttyFi32!
NuttyFi32 RoadTest Program The NuttyFi32 RoadTest program invites engineers and developers to independently evaluate the NuttyFi32 WiFi IoT board in real-world conditions. Participants will receive hardware and are expected to test, document, and share practical feedback with the community. What is a RoadTest? Category: ESP32 Development BoardManufacturer: SME DehradunRoadTest Status:...
Read More
Apply to Test the NuttyFi2.0!
NuttyFi2.0 RoadTest Program The NuttyFi2.0 RoadTest program focuses on evaluating the NuttyFi2.0 WiFi IoT board for Arduino-based development and real-world IoT applications. Participants will test usability, board support, and deployment readiness. What is a RoadTest? Category: NuttyFi2.0 ESP8266 Development BoardManufacturer: SME Dehradun🟢 RoadTest Status: Applications OpenRoadTest Duration: 4 WeeksUnits Available:...
Read More
How to install NuttyFi2.0 Wifi IoT Board in Arduino IDE
The NuttyFi2.0 development board has its own dedicated Arduino Board Manager package. This means you can install board support directly using a custom Board Manager JSON — no need to manually pick a generic ESP32 board. Unlike the official ESP32 package (which installs many ESP32 board definitions and increases storage...
Read More
How to Install the NuttyFi32 Board in Arduino IDE
The NuttyFi32 board has its own dedicated Arduino Board Package, allowing users to install board support directly using a custom Board Manager JSON—without selecting a generic ESP32 board. While the official ESP32 board package installs support for multiple ESP32 boards, increasing storage usage and IDE complexity, NuttyFi32 uses an independent...
Read More
Step-by-Step Guide to Install New Blynk2.0 Python Library in Raspberry Pi
This tutorial will guide you how you can install the New Blynk2.0 Python Library in Raspberry Pi . So Open the LX Terminal Window in the Raspberry pi desktop. Once installed, then you need to install the New Blynk library through below command. git clone https://github.com/vshymanskyy/blynk-library-python.git This command will install...
Read More
DHT11 Sensor Data to New blynk2.0 IoT using Raspberry Pi
This tutorial will guide you how you can connect Raspberry Pi with New Blynk2.0 IoT App and Web Dashboard.. So connect the DHT11/DHT22 Sensor with Raspberry pi as per this circuit diagram. Now, install the DHT sensor poython library in the Raspberry Pi through the below commands. sudo pip3 install...
Read MoreLooking for any kind of Help...
Drop us mail at nuttyengineeronline@gmail.com