Description
ATMEGA16/32 Development Board is made from single side PCB board to provide extra strength to the connector joints for increased reliability. Board can work on 7.5V to 15V AC or DC supply. It has built-in reverse polarity protection. 7805 voltage regulator has heat sink for heat dissipation so that it can supply 1Amp current continuously without getting over heated. It has switches for boot loading, reset and power. All the ports are connected to standard 8 Pins connectors. Open pads for connecting microcontroller’s pins to external devices are also provided.
Specifications:
- Microcontroller: ATMEGA16/32 with 16MHz crystal
- High quality PTH PCB for added strength.
- Power: 7 .5 to 15V, AC or DC, Â 7805 for better current rating
- Reverse polarity protected
- Switches: Boot, Reset, Power
- Compatible with General purpose prototyping board for development board for stackable design
ATMEGA16 Microcontroller Features
- Advanced RISC Architecture
- Up to 16 MIPS Throughput at 16 MHz Crystal Oscillator
- 16K Bytes of In-System Self-Programmable Flash
- 512 Bytes EEPROM
- 1K Byte Internal SRAM
- 32 Programmable I/O Lines
- In-System Programming by On-chip Boot Program
- 8-channel, 10-bit ADC
- 8 Single-ended Channels
- 2 Differential Channels with Programmable Gain at 1x, 10x, or 200x
- Two 8-bit Timer/Counters with Separate Prescalers and Compare Modes
- One 16-bit Timer/Counter with Separate Prescaler, Compare Mode, and Capture
- Real Time Counter with Separate Oscillator
- Four PWM Channels
- Programmable Serial USART
- Master/Slave SPI Serial Interface
- Byte-oriented Two-wire Serial Interface
- Programmable Watchdog Timer with Separate On-chip Oscillator
- External and Internal Interrupt Sources
- 40-pin PDIP package
Reviews
There are no reviews yet.